• Arnold Plating factory, Santa Clara, California. (2023)
• EPZ Plating factory, Santa Clara, California. (2020-2022)
• EramNoosh water company, Tehran. (2009)
• Gilan Steel Manufacturing factory for SehiSazan Kaviyan Company. Structural and Architectural Design of Gable frames with 2640sqm. (2007)
• Ahvaz Milling Factory for SehiSazan Company. Structural Design with 3000sqm. (2007)
• FESTO-Germany Factories Complex Iran Branch for Dr. Afshar Naderi and Festo Company. Retrofit & Structural Design of 2500sqm. (2006)
• Structural Design of Battery Support Structure for Porsoo Electric. Seismic Design of Structure for UPS Battery support for One Battery Unit. (2006)
• Sirri Island Petrochemical Plant for Petro Iran Co. Structural Design for 1000sqm including explosion proof buildings. (2005)
• Mahdasht Factory for Mr. Boromand & Mr. Yare Ahmadi. Structural & Architectural Design with 1000sqm. (2004)
• Alifard factory – Cooling tower structure for Alifard Company & Mr. Karimi. Structural Design for 1000sqm. (2000)
• Pirooz Rubber Factory. Structural design with 500sqm. (2000)
• Eizeh – Gable frame, for Mahsar Abniyeh, Structural Design. 800sqm. (2000)
• Iran Vanet Factory, for Iran Vanet Factory, Electrical Design. 3000sqm. (2000)
• Design of steel platform for Tire milling with special dynamic and vibration analysis for “Pirooz” tire making company. (1998)
• Razi Petrochemical Factory. For Tarh & Palayesh Consulting Engineers. 1200sqm. (1998)
• Dore Ray Dairy Factory. Basic Design 3000sqm. (1997)
• Spaghetti Company – 2.5 tons, for Mr. Asadi, with 400sqm Structural & Architectural Design. (1997)
• Foundation of heavy weight steel cutter with soil-foundation dynamic analysis. (1997)
• Pencil Factory, Electrical Cabinet Factory, Tavanab Workshop. (1994)
• Ice Factory, for Mr. Khodaverdi & Mr. Rostamian. Design of Factory with 1000sqm. (1994)
• Electrical Board Producing Factory, for Abzelute Company & Mr. Khaki – Design of Gable frame with Crane, 360sqm. (1993)
• Hydraulic Elevator (2500 ton) – Detail Design. (1992)
• Warehouse (Gable frame). (1992)
• Warehouse (truss structure), 16000sqm, for Bonlad Co. (1992)
• Gable frame with 18 meters span, for Mr. Ghaderi. Structural Design with 500sqm. (1992)
• Dezful – Control Center Building, for Kerman-Tablo Company – Structural & Architectural Design, 250sqm. (1992)
• Sharafi Glass Factory, Structural Design of Gable frame with 12-meter span, 600sqm. (1991)
• Warehouse in Tabriz (truss structure), Bonlad Co., 10000sqm. (1991)
• LCT Power House, Reinforced Concrete Structure for Abniyeh Fani Co. (1991)
• Steel Gable Frame (12m span), Vierendeel Truss frame for Abniyeh Fani. (1991)
• Gable frame for Factory for Abniyeh-Fani Company. Gable Frame with 12-meter span (2000sqm). (1991)
• Power Plant Building for Telecommunications Company for Abniyeh-Fani Company – Structural Design of RC Building with 20-ton crane – 1000sqm. (1991)
• Factory laboratory Kian Tire for Bonlad Consulting Engineer. Structural Design of Frame with 6 meters cantilever beam. (1990)
• Redesign of Laboratory Building of Kian Tire Factory for Bonlad Consulting Engineer. Vierendeel Truss structural system. (1990)
• Overhead crane, tire milling foundations and lab structure for Bonlad Co.; BF Goodrich of Iran. (1989)
• Kian Tire Factory Truck pathway, for Bonlad Consulting Engineers, Structural Design of slopes truss with 10 & 14 meters span. (1989)
• Kian Tire laboratory, for Bonlad Consulting Engineers. Structural Design of Frame with plate girder. (1989)
• Kian Tire Crane structure 4-roll milling hall, for Consulting Engineers. Structural Design of Crane with 14m span & 1 to 3 tons capacity. (1989)
ARNOLD METAL FINISHING FACTORY, SANTA CLARA (2024)
Description: The project consists of:
Seismic anchorage design of the equipment
Periodic inspection and structural observations
Type of order: Full scope Structural Design of Factory as per the above scope
Owner/Client: Arnold Sanchez Company
Ordered by: Arnold Sanchez Company
Project Manager: Amin Ghafooripour
Lead Engineer: Amin Ghafooripour
Architect: Arnold Sanchez Company
Structural/Civil Eng.: Amin Ghafooripour
Mech. & Elec. Eng.: Arnold Sanchez Company
Technology consultant: Arnold Sanchez Company
Supervision/Construction: Arnold Sanchez Company
Contractor: Arnold Sanchez Company
Location: Santa Clara, California, USA
Project size: N.I.A.
Construction cost: N.I.A.
Engineering Software: N.A.
Date of project: 2024
EVALUATION OF THE STEEL FRAME, GILROY (2024)
Description: The project was conducted under Fortress Structural Engineering Inc., which is the primary consultant and consists of:
Inspection and evaluation of the existing steel frame and anchorages
Type of order: Full scope Structural Evaluation of Factory as per the above scope
Owner/Client: Confidential – Contractor
Ordered by: Fortress Structural Engineering Inc. (copyright of the project belongs to this company)
Project Manager/Fortress President: Marcus Oden
Lead Engineer under Fortress: Amin Ghafooripour
Architect: Fortress SE Inc.
Structural/Civil Eng. under Fortress: Amin Ghafooripour
Mech. & Elec. Eng.: Confidential
Technology consultant: Confidential
Supervision/Construction: Confidential
Contractor: Confidential
Location: Gilroy, California
Project size: N.I.A.
Construction cost: N.I.A.
Engineering Software: N.A.
Date of project: 2024
DESIGN OF HVAC SYSTEM INSIDE THE COLD STORAGE
(-5F = -21C), REEDLEY, CALIFORNIA (2023)
Description: The project was conducted under Fortress Structural Engineering Inc., which is the primary consultant and consists of:
Design of the HVAC seismic anchorage inside the cold storage in a freezing condition (-5F = -21C) using aluminum structure
Type of order: Full scope Structural design of the Aluminum HVAC support in the freezing temperature
Owner/Client: Confidential – Contractor
Ordered by: Fortress Structural Engineering Inc. (copyright of the project belongs to this company)
Project Manager/Fortress President: Marcus Oden
Lead Engineer under Fortress: Amin Ghafooripour
Architect: Fortress SE Inc.
Structural/Civil Eng. under Fortress: Amin Ghafooripour
Mech. & Elec. Eng.: Confidential
Technology consultant: Confidential
Supervision/Construction: Confidential
Contractor: Confidential
Location: Reedley, California
Project size: N.I.A.
Construction cost: N.I.A.
Engineering Software: N.A.
Date of project: 2023
EPZ PLATING FACTORY, SANTA CLARA (2020-2022)
Description: The project was conducted under Fortress Structural Engineering Inc., which is the primary consultant and consists of:
Designing the overhead crane structure for the plating process
Seismic anchorage design of the plating tanks
Design of PPE (Polypropylene) plating tank structures
Design of the chemical containment area around the chemical tanks based on probability analysis, Hausner water-structure interaction to estimate wave height and contain the wave during an earthquake to minimize injuries
Equipment anchorage design
Design of LSF (Light Steel Frame) building
Evaluation of the firewall
Periodic inspection/structural observations
Type of order: Full scope Structural Design of Factory as per the above scope
Owner/Client: EPZ Company
Ordered by: Fortress Structural Engineering Inc. (copyright of the project belongs to this company)
Project Manager/Fortress President: Marcus Oden
Lead Engineer under Fortress: Amin Ghafooripour
Architect: Under EPZ management
Structural/Civil Eng. under Fortress: Amin Ghafooripour
Mech. & Elec. Eng.: Under EPZ management
Technology consultant: Under EPZ management
Supervision/Construction: Under EPZ management
Contractor: Under EPZ management
Location: Santa Clara, California, USA
Project size: N.I.A.
Construction cost: N.I.A.
Engineering Software: N.A.
Date of project: 2020-2022
KELLOGG’S FACTORY CANOPY DESIGN (2018)
Description: The project was conducted under Fortress Structural Engineering Inc., which is the primary consultant and consists of:
Designing the canopy for the factory in San Jose
Type of order: Full scope Structural Design of Factory as per the above scope
Owner/Client: One of the Kellogg’s contractors (Confidential)
Ordered by: Fortress Structural Engineering Inc. (copyright of the project belongs to this company)
Project Manager/Fortress President: Marcus Oden
Lead Engineer under Fortress: Amin Ghafooripour
Architect: Fortress SE Inc.
Structural/Civil Eng. under Fortress: Amin Ghafooripour
Mech. & Elec. Eng.: Confidential
Technology consultant: Confidential
Supervision/Construction: Confidential
Contractor: Confidential
Location: San Jose, California
Project size: N.I.A.
Construction cost: N.I.A.
Engineering Software: N.A.
Date of project: 2018
SHARON STONE FACTORY, SAN JOSE, CALIFORNIA (2017)
Description: Inspection and evaluation of the storage capacity of the stone fabrication factory.
Type of order: Full scope structural inspection and evaluation
Description: The project includes the main factory hall. The length of the factory is 342’, and its height is 50’. The project area is 34,200 sq. ft. There is one overhead crane with a 20-ton capacity in the factory hall.
Type of order: Full scope consultancy for architectural and structural design
Owner/Client: Raban-Al-Safina Group of Companies (Iraq)
Ordered by: Raban-Al-Safina Group of Companies (Iraq), Mr. Ebrahim Azim
Lead Engineer: Dr. Amin Ghafooripour
Project Manager: Fatemeh Ashtari
Architect: Pars Pair Consulting Eng.
Structural/Civil Eng.: Dr. Amin Ghafooripour, Fatemeh Ashtari, Heydar Abbasi, Nastaran Ashtari, Rosa Oladi, Milad Farahaninia, A.M.M. Tabrizi, Fatemeh Sefati, Fariba Badali, Niloofar Ebrahimi
Mech. & Elec. Eng.: Bahram Artemes
Supervision/Construction: N.I.A.
Contractor: Raban-Al-Safina Group of Companies (Iraq)
Location: Karbala City, Iraq
Project size: 34,200 SF
Construction cost: N.I.A.
Engineering Software: SAP 2000, AutoCAD 2004, Safe 2000
Date of project: 2015
RABAN AL-SAFINA, TURBINE SHED IN BASRA, IRAQ (2012)
Description: Rehabilitation of a 16-ton crane railway for the Turbine Shed in Basra Factory.
Type of order: Full scope consultancy for architectural and structural design
Owner/Client: Raban-Al-Safina Group of Companies (Iraq)
Ordered by: Raban-Al-Safina Group of Companies (Iraq), Mr. Ebrahim Azim
Contractor: Raban-Al-Safina Group of Companies (Iraq)
Location: Basra City, Iraq
Project size: N.A.
Construction cost: N.I.A.
Engineering Software: SAP 2000
Date of project: 2012
SOLAR ENERGY CENTER, BAGHDAD, IRAQ (2012)
Description: The project includes the main factory hall. The span is 24’ and the length of the factory is 90’, and its height is 20’. The project area is 2,160 sq. ft. There is one overhead crane with a 20-ton capacity in the factory halls.
Type of order: Full Scope consultancy for architectural and structural design
Owner/Client: Scientific Council of Ministry of Industry – Solar Energy Center – Iraq
Engineering Software: SAP 2000, AutoCAD, Safe 2000
Date of project: 2012
SCADA BUILDINGS (2200 KM ETHYLENE PIPELINE)
THE NEW PHILOSOPHY FOR FUTURE DESIGN METHOD (2010)
Description: These buildings are designed primarily for S.C.A.D.A unit; 100 Buildings are located from Assaluye to Mahabad along the 2200 km Ethylene pipeline to monitor the pipeline. According to the special requirements of this type of structure for instruments, they have been designed in three categories. This regimentation is based on these items: wind load, snow load, soil type, humidity, earthquake effect, temperature, and rainfall. Thermal Insulation should be under control, and thus the project could be categorized as smart, green, and a sample for future design. So insulation in every region is designed separately with accuracy. Walls are made from sandwich panels whose thicknesses are designed for -10 to +45 degrees Celsius in critical conditions.
Type of order: Full scope consultancy, Basic design, Detail design, and supervision.
Location: From Assaluye to Mahabad — 100 sites along the Ethylene pipeline — western part of Iran.
Project size: 100 units, Area of each one is about 25sqm
Construction cost: 2,000,000 USD
Engineering Software: Sap 2000 – AutoCAD – Xsteel
Date of project: 2010
ERAM-NOOSH WATER AND BEVERAGES FACTORY, TEHRAN (2009)
Description: The project consists of a 60’×25’ steel gable frame with a heavily reinforced slab on grade to carry the load of stacked bottled beverages. Reinforced concrete piles were used for the structure and the slab on grade.
Type of order: Full scope Structural Design of Factory
Owner/Client: Confidential
Ordered by: Eram-Noosh Factory
Lead Engineer: Amin Ghafooripour
Project Manager: Amin Ghafooripour
Architect: Padir Consulting Engineers
Structural/Civil Eng.: Amin Ghafooripour
Mech. & Elec. Eng.: N.I.A.
Technology consultant: N.I.A.
Supervision/Construction: N.I.A.
Contractor: N.I.A.
Location: Tehran – Iran
Project size: 15,000 SF
Construction cost: N.I.A.
Engineering Software: SAP 2000
Date of project: 2009
EBARA PUMP FACTORY (2008)
Description: Ebara pump factory has been located in Tehran-Parand district. Ebara factory project consists of three different buildings:
Main production hall
Office building
Guard house
Main production hall building has two equal gable bays that each one has 18 meters; one bay has a 5-ton overhead crane. The length of the hall is 81 meters. The height of the hall at the highest location is 13.2 meters and at the lowest level is 6.3 meters. Walls compositions are made of concrete and sandwich panels, which the heights of concrete walls are 1.2 meters. Hinge connections with bracings in both directions are the structural system of the main hall. Gravity loads are conducted to the ground by the truss system, and lateral loads are carried by bracings.
The office building is about 500 square meters with three stories, and the walls are made of sandwich panels. Guard house walls are also made of sandwich panels. Different structural systems have been considered through precise analysis and surveys.
Type of order: Architectural, Structural, Electrical and Mechanical Design including Basic & Detail Design
Owner/Client: Ebara Company
Ordered by: Dr. Kamran Afshar Naderi
Lead Engineer: Dr. Amin Ghafooripour
Project Manager: Dr. Amin Ghafooripour
Architect: Dr. Kamran Afshar Naderi for concept & Basic design; Dr. Amin Ghafooripour, Ali Zare, Marjan Tabrizi for detail design.
Engineering Software: AutoCAD 2004, SAP 2000, ETABS 2000, Safe2000
Date of project: 2008
1000 TON VESSEL HEAVY TRANSPORTATION (2007)
Appreciation letter from Goldhofer to Dr. Amin Ghafooripour for Implementation on boggies
Description: It is a safe transporter for a 1000-ton vessel in Assaluye port, which may be unique in the Middle East, and is designed for IRAN DENA Transportation Company. The problem was about the available capacity of the trailer in Iran. Their capacities were equal to 300 ton. The Goldhofer company (the trailer manufacturer) announced that transportation would be impossible unless the new type is used. Pars Padir Consulting Engineers provided support to spread the load on the trailer based on their technical specification and analysis of their structure and springs. The job was successfully carried out and Goldhofer featured it as news on their website, announcing that they would modify their design procedure.
The 1000-ton VESSEL shall be placed on top of the bogie from the JUMBO ship, using two heavy-duty 800-ton cranes.
The bogie shall carry the vessel to the expected location.
The vessel shall be erected on top of saddles, which are located on top of the foundation.
Saddles were designed for this purpose.
Type of order: Full scope of structural design and analysis of trailer – spread force supports and saddles
Technology consultant: Goldhofer Company – Germany
Owner/Client: Iran Dena Company
Ordered by: Iran Dena Company
Lead Engineer: Dr. Amin Ghafooripour
Project Manager: Dr. Amin Ghafooripour
Architect: N.A.
Structural/Civil Eng.: Dr. Amin Ghafooripour, Hessam Shamshiri, A.M.M. Moghaddam Tabrizi, Amir Azad, H. Abbasi, F. Ashtari, Milad Farhaninia
Mech. & Elec. Eng.: N.A.
Supervision/Construction: by client
Contractor: by client
Location: Assaluye – Iran
Project size: N.A.
Construction cost: N.A.
Engineering Software: AutoCAD 2004, SAP 2000, ETABS 2000, Safe2000
Date of project: 2007
SEHI–SAZAN KAVIAN STEEL MANUFACTURING FACTORY IN AHWAZ (2007)
Description: The project includes the main factory hall and one administration building. The main factory hall has two equal 20m gabled bays. The length of the hall is 108 meters and the height is 12 meters. The distance between the two halls is 20 meters, and the space between them is the stock area. There are two overhead cranes with 20-ton capacity in the factory halls. As this project is close to the Karoon River, the underground water level is high, so driven piles are utilized for the foundation. The administration building is located in the main factory hall and has two stories.
Type of order: Full scope consultancy for architectural and structural design
Owner/Client: Sehi Sazan Kavian
Ordered by: Sehi Sazan Kavian – Mr. Ebrahim Azim
Lead Engineer: Dr. Amin Ghafooripour
Project Manager: Fatemeh Ashtari
Architect: Pars Padir Consulting Eng.
Structural/Civil Eng.: Dr. Amin Ghafooripour, Fatemeh Ashtari, Heydar Abbasi, Nastaran Ashtari, Rosa Oladi, Milad Farahaninia, A.M.M. Tabrizi, Kianoosh Keyghobadi, Mohammad Asgari, Koosha Shahsavari, Ali Eskandari Gheshlagh, Shokooh Makvand, Mehdi Ghesmati
Mech. & Elec. Eng.: N.A.
Supervision/Construction: N.A.
Contractor: Sehi Sazan Co.
Location: Alley No. 1918 – Simaye Iran Street – Gharb Town – Ahwaz – Iran
Project size: 8200sqm
Construction cost: N.A.
Engineering Software: SAP 2000, AutoCAD 2004, Safe 2000
Date of project: 2007
FESTO PNEUMATIC FACTORY (2006)
Description: The project carried out for design and retrofit of the main hall for Festo company in Iran, including:
Administrative building
Utility Channel
Guard House
Utility House and Diesel Generator Building
Extension of Production Hall
Retrofit of Existing Factory Hall
Dog bone connection was used for the administrative building for the first time in Iran as an efficient seismic design.
Type of order: Structural Design – Retrofit of the existing buildings as described
Owner/Client: FESTO Company – Germany (Iran office)
Ordered by: Dr. Kamran Afshar Naderi Design Office
Lead Engineer: Dr. Amin Ghafooripour
Project Manager: Ali Mohammad Moghaddam Tabrizi
Architect: by client
Structural/Civil Eng.: Dr. Amin Ghafooripour, A.M.M. Tabrizi, Milad Farahaninia, Nastaran Ashtari, Heydar Abbasi, Fatemeh Ashtari, Hossein Kiamehr, M. Asgari
Mech. & Elec. Eng.: by client
Supervision/Construction: Dr. Afshar Naderi Office
Contractor: N.I.A.
Location: FESTO
Project size: 2500sqm
Construction cost: by client
Engineering Software: AutoCAD 2004, SAP 2000, ETABS 2000, Safe2000
Date of project: 2006
DESIGN OF CABLE STACK & SEA FASTENING – UK (2005)
Description: The Cable Stack is designed for the supply and installation of submarine cables for the Salman EPC-3 offshore project, which is located in the Persian Gulf. Documents contain analysis and design calculation notes for the cable stack structure. Two units of this structure have been fabricated in the UK. (DNV – Abudhabi office approved the design documents.) The cable stack, after being coiled, was transported to the nearby port for onward shipment by cargo vessels to a port in the Persian Gulf. Lloyd’s Insurance Co. provided insurance based on approved supervision documents by the Bureau of Veritas for sea fastening. A company in Brighton manufactured the structure.
Type of order: Structural design & Supervision – Full scope structural consultancy, supervision in London, and design of sea fastening up to DNV approval, demonstrating the quality of the job
Owner/Client: Petro-Iran Company
Ordered by: Amid Engineering and Development Company as EPC contractor
AMID Company Manager: Dr. A.A. Golafshani
AMID Company Lead Eng: Prof. Ali Akbar Aghakoochak
Lead Engineer in the UK: Dr. Amin Ghafooripour
Project Manager: Amid Eng. Co.
Architect: N.A.
Structural/Civil Eng.: Dr. Amin Ghafooripour
Mech. & Elec. Eng.: N.A.
Supervision/Construction: DNV-UK
Contractor: Little Hampton Company – South Hampton
Location: Little Hampton Factory, South Hampton Industrial Real Estate, Brighton, London, UK
Project size: 700sqm
Construction cost: 90000 USD
Engineering Software: AutoCAD 2000, SAP 2000, ETABS 2000, Safe2000
Date of project: 2005
KORDAN, WEAVING FACTORY (2000)
Description: The project consists of a 45m Gable frame, an administration building, and a 12m Gable frame for the power house.
Type of order: Full scope Structural Design of Factory
Owner/Client: Mr. Saebi
Ordered by: Mr. Saebi
Lead Engineer: Amin Ghafooripour
Project Manager: Amin Ghafooripour
Architect: Mr. Saebi
Structural/Civil Eng.: Amin Ghafooripour
Mech. & Elec. Eng.: N.I.A.
Technology consultant: N.I.A.
Supervision/Construction: Mr. Saebi
Contractor: N.I.A.
Location: Kordan – Karaj – Iran
Project size: 5000sqm
Construction cost: N.I.A.
Engineering Software: SAP 90
Date of project: 2000
DORE-RAY DAIRY FARM (1996-1998)
Description: The 450 ton/day dairy farm, including milk, butter, cheese, and cream products, was designed in the Fashapooyeh region, near Tehran, the capital. The complex consists of milk receiving units, warehouses, workshops, guard rooms, guard poles, sports rooms, playground, monument, administration building, an underground man walk channel, elevated water tanks, ground water tanks, power house, waste water treatment, storage, utility rooms, and main hall (60×120)m. The mechanical rooms consist of compressors, boilers, ice water making, steam producers, and a water supply system.
Type of order: Full scope consultant services (preliminary design and reports, contract drawings and calculations, contract procedures)
Owner/Client: Dore-Ray Company
Ordered by: Dore-Ray Company
Lead Engineer: Dr. Amin Ghafooripour
Project Manager: Dr. Amin Ghafooripour
Architect: Mozafar Karimi (only for the Administration building) – All others by Dr. Amin Ghafooripour & Tatrapak
Structural/Civil Eng.: Dr. Amin Ghafooripour (Project Manager and Structural Designer, Designer, and Coordinator of Industrial Plants and Construction), Nastaran Ashtari (Site Planner and Coordinator of Contract Drawings)
Location: Fashapooyeh, Hassan Abad Ind. City – close to police station, Qom – Tehran, Iran
Project size: 15000sqm
Construction cost: N.I.A.
Engineering Software: SAP 90
Date of project: 1996-1998
ICE MANUFACTURING FACTORY, TEHRAN (1994)
Description: The project consists of designing the ICE factory and the ice cube manufacturing process.
Type of order: Full scope Design of Factory
Owner/Client: Mr. Khodaverdi & Mr. Rostamian
Ordered by: Mr. Khodaverdi & Mr. Rostamian
Lead Engineer: Amin Ghafooripour
Project Manager: Amin Ghafooripour
Architect: Padir Consulting Engineers
Structural/Civil Eng.: Amin Ghafooripour
Mech. & Elec. Eng.: N.I.A.
Technology consultant: N.I.A.
Supervision/Construction: N.I.A.
Contractor: N.I.A.
Location: Tehran – Iran
Project size: 10,000 SF
Construction cost: N.I.A.
Engineering Software: SAP 2000
Date of project: 1994
KHOSRAVI LEATHER CO. (1993)
Construction of industrial foundation
Erection of Drums (50 tons weight of each drum)
Description: A leather factory consists of various halls, a powerhouse, a bathroom, and a restaurant. The length of the main hall is 140 meters, and its width is 65 meters, with a bent structural system of Warren trusses. Bonlad Consulting Engineers designed the architectural plans.
Type of order: Structural design, Mechanical and Electrical design of hall “A,” warehouse, and power house
Owner/Client: Khosravi Leather Co.
Ordered by: Bonlad Consulting Engineers (Supervised, managed, and architectural design performed by Bonlad Consulting Engineers; Mr. Asghar Mashayekh, Managing Director, and Ms. Nooshin Ghafooripour, Architect)
Lead Engineer: Mr. Asghar Mashayekh
Project Manager: Ms. Nooshin Ghafooripour
Architect: Mr. Asghar Mashayekh – Nooshin Ghafooripour
Structural/Civil Eng.: Dr. Amin Ghafooripour, Structural Designer; Nastaran Ashtari, Structural Designer and Coordinator of Contract Drawings
Description: The project runs for a glass factory. The main production hall, storage, and offices were designed. General survey after 20 years shows the accuracy of the design due to the absence of any structural defect or architectural modification over the decades.
Type of order: Full scope architectural & structural design & supervision
Description: Full scope consultancy carried out by Bonlad Consulting Engineers for the development plan of Kian Tire (B.F. Goodrich-Iran) MFG.
Type of order: Banbury & 107 – 4 buildings. Architectural detail design carried out by Amin Ghafooripour. Additionally, the laboratory structure, lift truck passage, and overhead crane structures for the factory were designed by Amin Ghafooripour as a member of Bonlad Co.
Owner/Client: Kian Tire Factory
Ordered by: Bonlad Consulting Engineers
Lead Engineer: Nooshin Ghafooripour
Project Manager: Asghar Mashayekh – Managing Director of Bonlad Co.
Architect: Nooshin Ghafooripour – Bonlad Co.
Structural/Civil Eng.: Amin Ghafooripour – Dr. Amir Ali Famili
